Tag: M.W:500-600

12150-46-8, Name is 1,1-Bis(diphenylphosphino)ferrocene, molecular formula is C34H28FeP2, belongs to chiral-phosphine-ligands compound, is a common compound. In a patnet, once mentioned the new application about 12150-46-8, Application In Synthesis of 1,1-Bis(diphenylphosphino)ferrocene

The remarkable stability of BF4 , characterized in the solid state by X-ray analysis and in solution by 31P NMR spectroscopy, reveals a marked borderline character of Cu(I).

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law.Application In Synthesis of 1,1-Bis(diphenylphosphino)ferrocene. In my other articles, you can also check out more blogs about 12150-46-8

Reference：
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

The reaction rate of a catalyzed reaction is faster than the reaction rate of the uncatalyzed reaction at the same temperature.12150-46-8, Name is 1,1-Bis(diphenylphosphino)ferrocene, molecular formula is C34H28FeP2. In a Article，once mentioned of 12150-46-8, category: chiral-phosphine-ligands

Reactions of the cationic complex ions [PtMe(Me2SO)(PP)] + (PP = dppf (1,1?-bis(diphenylphosphino)ferrocene) and dppe (1,2-bis(diphenylphosphino)ethane)) with 5,10,15,20-tetrakis(4-pyridyl)-21H,23H- porphyrin (TpyP) led to the formation of the symmetrical tetraplatinated porphyrin complexes, [PtMe(PP)]4TpyP·X4 (PP = dppf, X = CF3SO3-, 3, and PP = dppe, X = BF 4-, 5) containing the organometallic fragment {PtMe(PP)}. The precursor sulfoxide platinum complexes [PtMe(Me2SO)(dppf)]CF 3SO3, 2 and [PtMe(Me2SO)(dppe)]BF4, 4, were prepared by halide abstraction from [PtMeCl(dppf)], 1, and by controlled protonolysis of [PtMe2(dppe)] respectively, in the presence of a small amount of dimethyl sulfoxide. All these starting platinum(ii) compounds, as well as the porphyrin derivatives 3 and 5, were fully characterized through elemental analysis, 1H NMR mono- and bidimensional, 31P{1H}, 31P-1H HMBC, UV/Vis absorption and photophysical measurements. The X-ray crystal structure of complex 1 has been determined. In order to ascertain the electronic influence of ferrocene, the spectroscopic and redox properties of 3 were compared with those of TPyP and of the analogous 5. Cyclic voltammetry (CV), differential pulse voltammetry (DPV), 1H and 31P NMR data, and UV/Vis data, all suggest a certain degree of communication between the central porphyrin and the peripheral hetero-bimetallic fragments. In contrast, no detectable interaction among these peripheral groups seem to come into play. Unlikely from the porphyrin derivative 5, formation of well defined fluorescent mesoscopic ring structures was easily achieved by simple evaporation from diluted dichloromethane solutions of 3. The Royal Society of Chemistry 2006.

The reactant in an enzyme-catalyzed reaction is called a substrate. Enzyme inhibitors cause a decrease in the reaction rate of an enzyme-catalyzed reaction.I hope my blog about 12150-46-8 is helpful to your research., category: chiral-phosphine-ligands

Reference：
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

A catalyst don’t appear in the overall stoichiometry of the reaction it catalyzes, but it must appear in at least one of the elementary reactions in the mechanism for the catalyzed reaction. 12150-46-8, Name is 1,1-Bis(diphenylphosphino)ferrocene, molecular formula is C34H28FeP2. In a Article，once mentioned of 12150-46-8, Application In Synthesis of 1,1-Bis(diphenylphosphino)ferrocene

Palladium catalyzed Negishi, Suzuki and Stille cross-coupling reactions of enantiopure 2,2?-diiodo-1,1?-binaphthyl with the corresponding 1,1?-dimetalloferrocenes gave the C2-symmetric binaphthyl bridged ferrocene 1-1,1?-(1,1?-binaphthyl-2,2?-diyl)ferrocene (1). The latter was obtained by Stille coupling with the bis(trimethylstannyl) derivative but not with the bis(tributylstannyl) one. Products of alkyl group transfer from tin to binaphthyl were obtained as the main products in both cases. The stereochemical result of these cross-coupling reactions in the positions 2 and 2? of 1,1?-binaphthyl depends on the reactivity of 1,1?-dimetalloferrocenes. Negishi coupling proceeds stereoconservatively (affording enantiopure product 1). Complete racemization of binaphthyl moiety occurs during the reactions with less reactive boron and tin organometallics. Proposed different reaction pathways include C1-symmetric palladium(II) intermediate in the former and configurationally unstable C2-symmetric pallada(IV)cyclic intermediate in the latter cases. In contrast to the cross-coupling reactions, free radical arylation of ferrocene with enantiopure 1,1?-binaphthyl-2,2?-bisdiazonium salt gave predominantly oligomeric binaphthyl bridged ferrocenes and only traces of the partially racemized product 1.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law.Application In Synthesis of 1,1-Bis(diphenylphosphino)ferrocene. In my other articles, you can also check out more blogs about 12150-46-8

Reference：
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

The reaction rate of a catalyzed reaction is faster than the reaction rate of the uncatalyzed reaction at the same temperature.166330-10-5, Name is (Oxybis(2,1-phenylene))bis(diphenylphosphine), molecular formula is C36H28OP2. In a Review，once mentioned of 166330-10-5, Application In Synthesis of (Oxybis(2,1-phenylene))bis(diphenylphosphine)

The borrowing hydrogen (BH) principle, also called hydrogen auto-transfer, is a powerful approach which combines transfer hydrogenation (avoiding the direct use of molecular hydrogen) with one or more intermediate reactions to synthesize more complex molecules without the need for tedious separation or isolation processes. The strategy which usually relies on three steps, (i) dehydrogenation, (ii) intermediate reaction, and (iii) hydrogenation, is an excellent and well-recognized process from the synthetic, economic, and environmental point of view. In this context, the objective of the present review is to give a global overview on the topic starting from those contributions published prior to the emergence of the BH concept to the most recent and current research under the term of BH catalysis. Two main subareas of the topic (homogeneous and heterogeneous catalysis) have been identified, from which three subheadings based on the source of the electrophile (alkanes, alcohols, and amines) have been considered. Then the type of bond being formed (carbon-carbon and carbon heteroatom) has been taken into account to end-up with the intermediate reaction working in tandem with the metal-catalyzed hydrogenation/dehydrogenation step. The review has been completed with the more recent advances in asymmetric catalysis using the BH strategy.

The reactant in an enzyme-catalyzed reaction is called a substrate. Enzyme inhibitors cause a decrease in the reaction rate of an enzyme-catalyzed reaction.I hope my blog about 166330-10-5 is helpful to your research., Application In Synthesis of (Oxybis(2,1-phenylene))bis(diphenylphosphine)

Reference：
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

In an article, published in an article, once mentioned the application of 12150-46-8, Name is 1,1-Bis(diphenylphosphino)ferrocene,molecular formula is C34H28FeP2, is a conventional compound. this article was the specific content is as follows.Application In Synthesis of 1,1-Bis(diphenylphosphino)ferrocene

The present invention relates to novel 5-(3-aminophenyl)-5-alkyl-5,6-dihydro-2H-[1,4]oxazin-3-amine derivatives as inhibitors of beta-secretase, also known as beta-site amyloid cleaving enzyme, BACE, BACE1, Asp2, or memapsin2. The invention is also directed to pharmaceutical compositions comprising such compounds, to processes for preparing such compounds and compositions, and to the use of such compounds and compositions for the prevention and treatment of disorders in which beta-secretase is involved, such as Alzheimer’s disease (AD), mild cognitive impairment, senility, dementia, dementia with Lewy bodies, cerebral amyloid angiopathy, multi-infarct dementia, Down’s syndrome, dementia associated with stroke, dementia associated with Parkinson’s disease and dementia associated with beta-amyloid.

Do you like my blog? If you like, you can also browse other articles about this kind. Application In Synthesis of 1,1-Bis(diphenylphosphino)ferrocene. Thanks for taking the time to read the blog about 12150-46-8

Reference：
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

Reference of 12150-46-8, Catalysts are substances that increase the reaction rate of a chemical reaction without being consumed in the process. 12150-46-8, Name is 1,1-Bis(diphenylphosphino)ferrocene, molecular formula is C34H28FeP2. In a Article，once mentioned of 12150-46-8

A transition metal-catalyzed intermolecular hydroamination of vinylarenes with alkylamines is reported. The combination of Pd(O2CCF3)4, DPPF, and TfOH was the most effective catalyst of those tested. Control experiments without palladium, acid, or ligand all occurred in low yield. The reaction of various vinylarenes with cyclic and acyclic alkylamines in the presence of 5 mol % of this catalyst formed the corresponding arylethylamine products in moderate to high yields. For example, reactions of morpholine, 4-phenylpiperazine, 4-Boc-piperazine, isoindoline, and tetrahydroisoquinoline with styrene all occurred in 58?75% yield. Acyclic amines such as N-benzylmethylamine and n-hexylmethylamine reacted with 2-vinylnaphthalene in 63% and 53% yields, respectively. Mechanistic investigations showed that the reaction occurred through an eta3-arylethyl palladium complex. The reactions of this complex with alkylamines generated product in combination with regenerating free vinylarene, Pd(0), and ammonium salt. Thus, one hurdle to developing hydroamination of vinylarenes with palladium complexes is the faster elimination of free vinylarene from the eta3-arylethyl complex than addition to form the C?N bond. The feasibility of conducting enantioselective hydroaminations with alkylamines was also examined. The product from addition of N-benzylmethylamine to 2-vinylnaphthalene was generated in 63% ee and 36% yield in the presence of Pd(OCOCF3)2, a ferrotane ligand, and TfOH cocatalyst. Copyright

The proportionality constant is the rate constant for the particular unimolecular reaction. the reaction rate is directly proportional to the concentration of the reactant. I hope my blog about 12150-46-8 is helpful to your research., Reference of 12150-46-8

Reference：
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

Application of 161265-03-8, Chemistry can be defined as the study of matter and the changes it undergoes. You’ll sometimes hear it called the central science because it is the connection between physics and all the other sciences, starting with biology.161265-03-8, Name is (9,9-Dimethyl-9H-xanthene-4,5-diyl)bis(diphenylphosphine), molecular formula is C39H32OP2. In a patent, introducing its new discovery.

Reduction of phosphine oxides to the corresponding phosphines represents the most straightforward method to prepare these valuable reagents. However, existing methods to reduce phosphine oxides suffer from inadequate chemoselectivity due to the strength of the P=O bond and/or poor atom economy. Herein, we report the discovery of the most powerful chemoselective reductant for this transformation to date, 1,3-diphenyl-disiloxane (DPDS). Additive-free DPDS selectively reduces both secondary and tertiary phosphine oxides with retention of configuration even in the presence of aldehyde, nitro, ester, alpha,beta-unsaturated carbonyls, azocarboxylates, and cyano functional groups. Arrhenius analysis indicates that the activation barrier for reduction by DPDS is significantly lower than any previously calculated silane reduction system. Inclusion of a catalytic Br°nsted acid further reduced the activation barrier and led to the first silane-mediated reduction of acyclic phosphine oxides at room temperature.

If you are interested in 161265-03-8, you can contact me at any time and look forward to more communication.Application of 161265-03-8

Reference：
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

Application of 12150-46-8, Catalysts are substances that increase the reaction rate of a chemical reaction without being consumed in the process. 12150-46-8, Name is 1,1-Bis(diphenylphosphino)ferrocene, molecular formula is C34H28FeP2. In a Article，once mentioned of 12150-46-8

Group 7-12 transition-metal complexes serve as effective catalysts for the regioselective intramolecular hydroamination of aminoalkynes having the general formula RC?C(CH2)n-NH2 (n = 3, R = H, Ph; n = 4, R = H) and of 2-(phenylethynyl)aniline. Primary products are pyrrolidines and piperidines bearing an alpha-alkylidene functionality and 2-phenylindole, respectively. Isomerization yields the corresponding pyrrolines and 1,2-dehydropiperidines. The catalytic properties of the transition-metal complexes depend on the appropriate choice of ligand, solvent, temperature, and counteranion. Principles for identifying the most active transition-metal catalysts for the hydroamination of alkynes and for optimizing the reaction conditions are developed. The X-ray crystal structure of one catalyst, [PdCl(triphos)](CF3-SO3), has been determined.

The proportionality constant is the rate constant for the particular unimolecular reaction. the reaction rate is directly proportional to the concentration of the reactant. I hope my blog about 12150-46-8 is helpful to your research., Application of 12150-46-8

Reference：
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

Application of 161265-03-8. Let’s face it, organic chemistry can seem difficult to learn. Especially from a beginner’s point of view. Like 161265-03-8, Name is (9,9-Dimethyl-9H-xanthene-4,5-diyl)bis(diphenylphosphine). In a document type is Article, introducing its new discovery.

2,3,5,6,8,9-Hexakis(phenoxycarbonyl)sumanene, a hexaA-substituted sumanene with CO 2 Ph groups at the peripheral aromatic carbons, was successfully prepared in good yield by Pd-catalyzed phenoxycarbonylationA-using a solvent of phenyl formate. Single-crystal X-ray structural analysis of this compound revealed the formation of a one-dimensional columnar structure, stacked in a staggered manner. The UV and emission spectra of this showed clear red-shifts compared with those of pristine sumanene, indicating the extension of the conjugation system.

If you are interested in 161265-03-8, you can contact me at any time and look forward to more communication.Application of 161265-03-8

Reference：
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

Electric Literature of 166330-10-5, Children learn through play, and they learn more than adults might expect. Science experiments are a great way to spark their curiosity, get their minds active, and encourage them to do something that doesn’t involve a screen. 166330-10-5, C36H28OP2. A document type is Article, introducing its new discovery.

Neutral mononuclear Cu(I) complexes based on 2,2?-dipyridylamine (dpa), formulated as [Cu(dpa)X(PPh3)] (X = Cl (A4), Br (A5), I (A6)), monocationic mononuclear Cu(I) complexes with counterion BF4-, i.e. [Cu(dpa)(PPh3)2](BF4) (A1), Cu(dpa)(DPEphos)(BF4) (A2) and [Cu(dpa)(Binap)](BF4) (A3), where DPEphos = bis [2-(diphenylphosphino) phenyl] ether, Binap = 2,2?-bis(diphenylphosphino)-1,1?-binaphthyl, have been prepared and characterized by 1H NMR, mass spectroscopy and single-crystal X-ray analyses. Their photophysical properties in both CH2Cl2 solution and PMMA (poly(methyl methacrylate)) film have been investigated. All the complexes display a typical metal-to-ligand charge transfer absorption band in the region of 350-400 nm, and a broad and featureless luminescence at room temperature. Specifically, their emission maxima vary from 494 to 562 nm in the PMMA films due to the different electronic characteristics of the auxiliary ligands. Additionally, the thermogravimetric analysis shows that those complexes chelated with diphosphine ligands have a higher thermal stability than those with triphenylphosphine or halides ligands.

If you are hungry for even more, make sure to check my other article about 166330-10-5. Electric Literature of 166330-10-5

Reference：
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate