Tag: M.W:500-600

166330-10-5, Name is (Oxybis(2,1-phenylene))bis(diphenylphosphine), molecular formula is C36H28OP2, belongs to chiral-phosphine-ligands compound, is a common compound. In a patnet, once mentioned the new application about 166330-10-5, Application In Synthesis of (Oxybis(2,1-phenylene))bis(diphenylphosphine)

New insight into the effects of N^N ligand isomerization and methyl modification on the phosphorescence properties of Cu(i) complexes with (1-(2-pyridyl)pyrazole/imidazole) ligands

The influence of ligand isomerization and methylation modification on the phosphorescence properties of metal complexes has been attracting great interest owing to the significant improvement of phosphorescence efficiency. In recent years, experimental results have shown that the substitution of a single methyl group in the N^N ligand of a Cu(i) complex can enhance the quantum yield. To further clarify the influence of methyl substituents, we investigated a series of Cu(i) complexes with (1-(2-pyridyl) pyrazole/imidazole and bis[2-(diphenylphosphino)phenyl]ether mixed ligands)[Cu(N^N)(P^P)] based on density functional theory (DFT) and time-dependent DFT (TD-DFT) methods. The results indicate that the additional methyl could increase the ratio of the d orbital in the frontier molecular orbitals of [Cu(N^N)(P^P)], thereby enlarging the 3MLCT (%); substitution of the parazole with an imidazole group could reduce the ratio of 3MLCT involved in emission transition. Furthermore, vibration analysis reveals that a methyl group substitution in the ortho-position of N2 increases the steric hindrance, thereby suppressing the vibration of benzene and the non-radiative dissipation caused by methyl. Meanwhile, this substitution enhances the energy difference between the T1 state and the S0 state (DeltaE) and reduces the non-radiative decay rate (knr). Our studies provide the intrinsic reason for the high PLQY of [Cu(N^N)(P^P)] complexes with ortho-methyl modification, including the reason for the low PLQY of the isomer.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law.Application In Synthesis of (Oxybis(2,1-phenylene))bis(diphenylphosphine). In my other articles, you can also check out more blogs about 166330-10-5

Reference£º
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

Application of 161265-03-8. Let¡¯s face it, organic chemistry can seem difficult to learn. Especially from a beginner¡¯s point of view. Like 161265-03-8, Name is (9,9-Dimethyl-9H-xanthene-4,5-diyl)bis(diphenylphosphine). In a document type is Article, introducing its new discovery.

Hydrogenolysis of beta-O-4 lignin model dimers by a ruthenium-xantphos catalyst

Hydrogenolysis reactions of so-called lignin model dimers using a Ru-xantphos catalyst are presented (xantphos = 4,5-bis(diphenylphosphino)-9,9- dimethylxanthene). For example, of some nine models studied, the alcohol, 2-(2-methoxyphenoxy)-1-phenylethanol (1), with 5 mol% Ru(H)2(CO) (PPh3)(xantphos) (18) in toluene-d8 at 135 C for 20 h under N2, gives in ?95% yield the C-O cleavage hydrogenolysis products, acetophenone (14) and guaiacol (17), and a small amount (<5%) of the ketone, 2-(2-methoxyphenoxy)-1-phenylethanone (4), as observed by 1H NMR spectroscopy. The in situ Ru(H)2(CO)(PPh 3)3/xantphos system gives similar findings, confirming a recent report (J. M. Nichols et al., J. Am. Chem. Soc., 2010, 132, 12554). The active catalyst is formulated 'for convenience' as 'Ru(CO)(xantphos)'. The hydrogenolysis mechanism proceeds by initial dehydrogenation to give the ketone 4, which then undergoes hydrogenolysis of the C-O bond to give 14 and 17. Hydrogenolysis of 4 to 14 and 17 also occurs using the Ru catalyst under 1 atm H2; in contrast, use of 3-hydroxy-2-(2-methoxyphenoxy)-1-phenyl-1- propanone (7), for example, where the CH2 of 4 has been changed to CHCH2OH, gives a low yield (?15%) of hydrogenolysis products. Similarly, the diol substrate, 2-(2-methoxyphenoxy)-1-phenyl-1,3-propanediol (9), gives low yields of hydrogenolysis products. These low yields are due to formation of the catalytically inactive complexes Ru(CO)(xantphos)[C(O)C(OC 6H4OMe)C(Ph)O] (20) and/or Ru(CO)(xantphos)[C(O)CHC(Ph)O] (21), where the organic fragments result from dehydrogenation of CH 2OH moieties in 7 and 9. Trace amounts of Ru(CO)(xantphos)(OC 6H4O), a catecholate complex, are isolated from the reaction of 18 with 1. Improved syntheses of 18 and lignin models are also presented. If you are interested in 161265-03-8, you can contact me at any time and look forward to more communication.Application of 161265-03-8

Reference£º
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

166330-10-5, Name is (Oxybis(2,1-phenylene))bis(diphenylphosphine), molecular formula is C36H28OP2, belongs to chiral-phosphine-ligands compound, is a common compound. In a patnet, once mentioned the new application about 166330-10-5, Formula: C36H28OP2

METAL COMPLEX HAVING AROMATIC RING LIGAND CONTAINING NITROGEN ATOM

A metal complex containing a nitrogen-containing aromatic ring ligand which has a dendritic molecular chain, and a copper(I) ion or a silver(I) ion. For example, the metal complex which is represented by compositional formula (8): (wherein M+ is a copper(I) ion or a silver(I) ion, L is a ligand, and X is a counter ion; p is a positive number, and q and r are each independently numerical numbers of 0 or more; R represents a hydrogen atom, a halogen atom, a cyano group, a nitro group, a carboxyl group, an amino group, an acylamino group, a silyl group, a hydroxyl group, an acyl group, a hydrocarbyl group, a hydrocarbyloxy group, a hydrocarbylthio group, or a heterocyclic group, wherein the amino group, the silyl group, the hydrocarbyl group, the hydrocarbyloxy group and the hydrocarbylthio group optionally have a substituent) has excellent heat resistance.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law.Formula: C36H28OP2. In my other articles, you can also check out more blogs about 166330-10-5

Reference£º
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

Children learn through play, and they learn more than adults might expect. Science experiments are a great way to spark their curiosity, get their minds active, and encourage them to do something that doesn¡¯t involve a screen. 166330-10-5, C36H28OP2. A document type is Article, introducing its new discovery., Quality Control of: (Oxybis(2,1-phenylene))bis(diphenylphosphine)

Synthesis and reactivity of chiral, wide-bite-angle, hybrid diphosphorus ligands

Effective and modular synthetic approaches toward phosphine-phosphite ligands and phosphine-phosphonite ligands featuring a diphenyl ether backbone have been developed. The phosphine-phosphite ligands are obtained by a two-step protocol from 2-bromo-2?-methoxydiphenyl ether. The phosphine-phosphonite ligands are prepared in a four-step synthetic protocol that involves a novel, unsymmetrical diphenyl ether derived phosphine-phosphorusdiamide as key building block. Structural studies on PtII complexes with either phosphine-phosphite or phosphine-phosphonite ligands indicate strict cis coordination for these ligand systems. High-pressure NMR spectroscopy studies of Rh complexes under syngas indicate the presence of two ea isomers for Rh(H)(CO)2(PP). The existence of this mixture is further supported by high-pressure IR spectroscopy studies. In order to benchmark the activity and selectivity of these novel, wide-bite-angle, mixed-donor ligands, they were screened in Pd-catalyzed asymmetric allylic alkylation as well as Rh-catalyzed hydrogenation and hydroformylation reactions. The ligands give 100-% conversion and low-to-moderate enantioselectivity in the allylic alkylation of 1,3-diphenyl-2-propenyl acetate and cyclohexyl-2-enyl acetate with dimethyl malonate. In the hydroformylation of styrene, good conversion and regioselectivities are achieved but only moderate enantioselectivity. The ligands give good conversions in asymmetric hydrogenation of typical substrates, with good-to-excellent enantioselectivities of up to 97-% depending on the substrate. The design of two subclasses of chiral, mixed-donor diphosphorus ligands with a diphenylether backbone is described. Both phosphine-phosphonite and phosphine-phosphite derivatives are accessible. Coordination to PtII and RhI is described, and high-pressure spectroscopy under syngas provides information on coordination geometry. The chiral ligand systems are benchmarked in Pd-catalyzed allylic alkylation and Rh-catalyzed hydrogenation and hydroformylation.

Interested yet? Keep reading other articles of 166330-10-5!, Quality Control of: (Oxybis(2,1-phenylene))bis(diphenylphosphine)

Reference£º
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

Application of 166330-10-5, Catalysts are substances that increase the reaction rate of a chemical reaction without being consumed in the process. 166330-10-5, Name is (Oxybis(2,1-phenylene))bis(diphenylphosphine), molecular formula is C36H28OP2. In a Article£¬once mentioned of 166330-10-5

Intra-cation versus inter-cation pi-contacts in [Cu(P^P)(N^N)][PF6] complexes

A series of [Cu(POP)(N^N][PF6] and [Cu(xantphos)(N^N][PF6] compounds has been prepared and characterized in which POP = bis[2-(diphenylphosphanyl)phenyl]ether (IUPAC PIN oxydi(2,1-phenylene)bis(diphenylphosphane), xantphos = 4,5-bis(diphenylphosphanyl)-9,9-dimethyl-9H-xanthene (IUPAC PIN (9,9-dimethyl-9H-xanthene-4,5-diyl)bis(diphenylphosphane)) and the N^N ligands are 4-(4-bromophenyl)-6,6′-dimethyl-2,2′-bipyridine (1), 5,5′-bis(3-methoxyphenyl)-6-methyl-2,2′-bipyridine (2), and 6-benzyl-2,2′-bipyridine (3). The single crystal structures of [Cu(xantphos)(1)][PF6].CH2Cl2, [Cu(xantphos)(2)][PF6].CH2Cl2 and [Cu(POP)(3)][PF6].0.5H2O were determined by X-ray diffraction. Each complex contains a copper(I) ion in a distorted tetrahedral environment with chelating N^N and P^P ligands. In the [Cu(xantphos)(1)]+ and [Cu(xantphos)(2)]+ cations, there are face-to-face pi-stackings of bpy and PPh2 phenyl rings (i.e. between the ligands); in addition in [Cu(xantphos)(2)][PF6].CH2Cl2, inter-cation pi-embraces lead to the formation of infinite chains as a primary packing motif. In [Cu(POP)(3)][PF6].0.5H2O, centrosymmetric pairs of [Cu(POP)(3)]+ cations engage in C?H?pi (phenyl to bpy) and offset face-to-face (bpy?bpy) contacts. The electrochemical and photophysical properties of the compounds containing ligands 1 and 2 are reported. They are green or yellow emitters in the solid-state (lambdaem in the range 535?577 nm) with values for the photoluminescence quantum yield (PLQY) in the range 19%?41%.

The proportionality constant is the rate constant for the particular unimolecular reaction. the reaction rate is directly proportional to the concentration of the reactant. I hope my blog about 166330-10-5 is helpful to your research., Application of 166330-10-5

Reference£º
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

A catalyst don’t appear in the overall stoichiometry of the reaction it catalyzes, but it must appear in at least one of the elementary reactions in the mechanism for the catalyzed reaction. 12150-46-8, Name is 1,1-Bis(diphenylphosphino)ferrocene, molecular formula is C34H28FeP2. In a Article£¬once mentioned of 12150-46-8, COA of Formula: C34H28FeP2

Tetracyclo(2,7-carbazole)s: Diatropicity and Paratropicity of Inner Regions of Nanohoops

Three N-substituted tetracyclo(2,7-carbazole)s were synthesized to investigate the inner regions of nanohoops. One compound has a 5,5-dimethylnonane bridge between two neighboring anti-carbazoles, which can be used as covalently bonded “methane probes”. These probes near the ring center are strongly shielded by local ring currents and exhibit a singlet at delta = -2.70 ppm in 1H NMR. To visualize local and macrocyclic ring currents separately, we drew nucleus-independent chemical shift contour maps of tetracyclo(9-methyl-2,7-carbazole) and [n]cycloparaphenylenes (CPPs). Local ring currents make the interior diatropic, and paratropic regions exist only outside the ring. Macrocyclic ring currents in [5]CPP to [7]CPP generate deshielding cones, which are typical of antiaromatic [4n]annulenes.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law.COA of Formula: C34H28FeP2. In my other articles, you can also check out more blogs about 12150-46-8

Reference£º
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

The reaction rate of a catalyzed reaction is faster than the reaction rate of the uncatalyzed reaction at the same temperature.166330-10-5, Name is (Oxybis(2,1-phenylene))bis(diphenylphosphine), molecular formula is C36H28OP2. In a Article£¬once mentioned of 166330-10-5, HPLC of Formula: C36H28OP2

Coordination-Induced Thermally Activated Delayed Fluorescence: From Non-TADF Donor-Acceptor-Type Ligand to TADF-Active Ag-Based Complexes

Herein, we present a new strategy in which highly emissive thermally activated delayed fluorescence (TADF) materials can be obtained from modifying or tuning a non-TADF donor (D)-acceptor (A)-type organic molecule via coordination of the metal ionic fragment. Theoretical calculation and photophysical properties reveal that the D-A-type free ligand emits both weak fluorescence and dual roomerature phosphorescence, whereas the two Ag(I) complexes display efficient blue TADF, exhibiting photoluminescence quantum yields nearly 100% in films with short decay lifetimes (tau ? 6 mus). This is attributed to the four optimized parameters induced by Ag(I) coordination: (1) narrow singlet (S1)-triplet (T1) energy gaps (I”EST). (2) T1 states have a hybrid local excitation and charge transfer (CT) character, and S1 states have a predominant CT character. Both the parameters facilitate reverse intersystem crossing. (3) Radiative rate constant (kr(S1?S0)) is increased. (4) Molecular rigidity is strengthened. For the first time, this work shows a powerful method to design efficient ligand-centered TADF in Ag(I) complexes based on the conventional D-A-type molecule, which significantly enriches the chemical space for the development of TADF materials.

Note that a catalyst decreases the activation energy for both the forward and the reverse reactions and hence accelerates both the forward and the reverse reactions.HPLC of Formula: C36H28OP2, you can also check out more blogs about166330-10-5

Reference£º
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

The reaction rate of a catalyzed reaction is faster than the reaction rate of the uncatalyzed reaction at the same temperature.166330-10-5, Name is (Oxybis(2,1-phenylene))bis(diphenylphosphine), molecular formula is C36H28OP2. In a Article£¬once mentioned of 166330-10-5, Safety of (Oxybis(2,1-phenylene))bis(diphenylphosphine)

Structural characterization, DFT studied, luminescent properties of cationic/neutral three-coordinated copper (I) complexes and application in warm-white light-emitting diode

A series of cationic/neutral copper (I) complexes, [Cu2(Hbmb)(PPh3)4] (BF4)2 (1a), [Cu2(Hbmb)(DPEPhos)2](BF4)2 (2a), [Cu2(Hbmb)(Xantphos)2](BF4)2 (3a), [Cu2(bmb)(PPh3)4] (1b), [Cu2(bmb)(DPEPhos)2] (2b), [Cu2(bmb)(Xantphos)2] (3b) (Hbmb = 1,4-bis (1H-benzimidazol ?2-yl)benzene, PPh3 = triphenylphosphine, DPEPhos = bis[2-(diphenylphosphino)-phenyl]ether, Xantphos =4,5-bis (diphenylphosphino)-9,9?-dimethyl-xanthene), have been synthesized and characterized by IR, TGA, XRD and X-ray crystal structure analysis. The structural analysis reveals that each Cu+ in all complexes adopts an almost ideal trigonal planar geometry, with three coordinate NP2, and the C-H¡¤¡¤¡¤pi and pi¡¤¡¤¡¤pi interactions are observed in the packing structures. DFT studied indicate the ingredients of the HOMOs and LUMOs for neutral copper (I) complexes 1b, 2b and 3b are different from cationic copper (I) complexes 1a, 2a and 3a, in accordance with the distribution of Muelliken atomic charges. Meanwhile, neutral copper (I) complexes 1b, 2b and 3b have fascinating broad blue-green emission bands at room temperature, while cationic copper (I) complexes 1a, 2a and 3a exhibit the existence of multiple emission peaks. Furthermore, the maximum phosphorescent lifetime and quantum yield at room temperature, for all copper (I) complexes, are 1143 mus and 8.82%, respectively. In addition, in order to measure the practical application of these complexes, the selection of complex 1b is used to fabricate the LED, which emits a bright warm-white light. Structural characterization, DFT studied, luminescent properties of cationic/neutral three-coordinated copper (I) complexes and its application in light-emitting diodes have been studied. At room temperature, the maximum phosphorescent lifetime and quantum yield are up to 1143 mus and 8.82%, respectively.

The reactant in an enzyme-catalyzed reaction is called a substrate. Enzyme inhibitors cause a decrease in the reaction rate of an enzyme-catalyzed reaction.I hope my blog about 166330-10-5 is helpful to your research., Safety of (Oxybis(2,1-phenylene))bis(diphenylphosphine)

Reference£º
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

The reaction rate of a catalyzed reaction is faster than the reaction rate of the uncatalyzed reaction at the same temperature.161265-03-8, Name is (9,9-Dimethyl-9H-xanthene-4,5-diyl)bis(diphenylphosphine), molecular formula is C39H32OP2. In a Article£¬once mentioned of 161265-03-8, Computed Properties of C39H32OP2

Catalytic carbonylation of renewable furfural derived 5-bromofurfural to 5-formyl-2-furancarboxylic acid in oil/aqueous bi-phase system

Utilizing sustainable biomass to partly replace the fossil feedstock as the carbon source of chemical industry has been well acknowledged because of the scarcity of the fossil resources. This work introduced a novel route for the synthesis of 5-formyl-2-furancarboxylic acid (FFA) from renewable furfural derived 5-bromofurfural, which achieves the transformation of furfural based platform molecule to the products having multifunctional groups, thus opens up its potential market in polymeric applications. Under the optimized conditions, this new catalysis provided up to 99% yield of FFA through oil/aqueous bi-phasic carbonylation. Remarkably, the FFA product could be feasibly separated from the remaining substrate and catalyst because of its aqueous solubility in the biphasic system, giving 95% isolated yield in gram scale synthesis. Currently, FFA is an unstable intermediate in hydroxymethylfurfural (HMF) oxidations; in viewing of that furfural is industrially produced from bulky agroforestrial byproducts, this furfural based route to FFA through catalytic carbonylation has offered an opportunity for its production in large scale.

The reactant in an enzyme-catalyzed reaction is called a substrate. Enzyme inhibitors cause a decrease in the reaction rate of an enzyme-catalyzed reaction.I hope my blog about 161265-03-8 is helpful to your research., Computed Properties of C39H32OP2

Reference£º
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

In an article, published in an article, once mentioned the application of 166330-10-5, Name is (Oxybis(2,1-phenylene))bis(diphenylphosphine),molecular formula is C36H28OP2, is a conventional compound. this article was the specific content is as follows.HPLC of Formula: C36H28OP2

Process for the preparation of secondary amines

N,N-disubstituted amines in which the amino nitrogen atom is bound to the carbon atom of an aromatic ring disubstituted in the positions ortho to the carbon atom, are prepared by allowing a primary amine and a compound in which an ortho, ortho-disubstituted aromatic compound carrying a nucleofuge substituent, to react in a basic environment in the presence of a catalytic palladium(0) complex and a ligand, the ratio of palladium complex to ligand being greater than at least 1:1. A typical embodiment involves the reaction of 2-methyl-6-ethylphenyl-trifluoromethylsulfonate and (S)-1-methoxy-2-aminopropane in the presence of bis(dibenzylideneacetone)palladium, tri-tert.-butylphosphine, and sodium tert.-butoxide to yield (S)-N-(1-methoxyprop-2-yl)-2-methyl-6-ethylphenylamine.

Do you like my blog? If you like, you can also browse other articles about this kind. HPLC of Formula: C36H28OP2. Thanks for taking the time to read the blog about 166330-10-5

Reference£º
Phosphine ligand,
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate