Tag: M.W:200-300

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.719-80-2,Ethoxydiphenylphosphine,as a common compound, the synthetic route is as follows.

719-80-2, General procedure: 2-Chloromethylbenzothiazole (1) (0.183 g, 0.001 mol) andpotassium iodide (KI) (0.166 g, 0.001 mol) were taken intoa round bottomed flask containing 20 mL of THF. Thereaction mixture was stirred for 3 h at 40C. After completionof the reaction as checked by TLC, cooled the reactionmass to RT and then filtered to remove the salt (KCl),resulted in iodo compound, 2-(iodomethyl) benzo[d]thiazole(2). The filtrate was transferred into a flask and sodiumazide (NaN3) (0.065 g, 0.001 mol) was added. The reactionmixture was stirred at 25-30C for 3 h to form an intermediate,2-azidomethylbenzothiazole (3). The reaction mixturewas filtered to remove the salt, NaI, and filtrate was takenfor the next step.Triphenylphosphine (4a) (0.262 g, 0.001mol) was added to 3under N2 atmosphere. The reaction mixture was stirred at 65-70C for 4 h and the progress of the reaction was monitored byTLC using ethylacetate: n-hexane (2:3) as an eluent. After completionof the reaction, the solvent was removed from the reactionmixture in a rotaevaporator to get the crude product and itwas purified by column chromatography using ethylacetate:nhexane(1:4) to obtain pure product, N-(1,3-Benzothiazol-2-ylmethyl)-N-(1,1,1-triphenyl-lambda5-phosphanylidene) amine (5a).The same procedure was adopted for the synthesis of remainingtitle compounds and the physical data of these compounds aresummarized in Table 1.

The synthetic route of 719-80-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Madhava; Subramanyam; Thaslim Basha; Jawahar Babu; Naga Raju; Phosphorus, Sulfur and Silicon and the Related Elements; vol. 191; 1; (2016); p. 16 – 21;,
Phosphine ligand
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

6372-42-5, Cyclohexyldiphenylphosphine is a chiral-phosphine-ligands compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,6372-42-5

A large amount of phosphorescent cuprous complex CuI (2-PBO) (PPh 2 Cy) crystal the preparation of the sample: weighing 0.5mmol CuI of dissolved in 12 ml in acetonitrile, weighing 0.5 diphenyl cyclohexyl phosphine biligand dissolved in 10 ml of methylene chloride, the two kind of solution mixing, and stirring to make fully undergo coordination reaction to obtain the colorless solution A; then weighing 0.5mmol the 2-PBO biligand dissolved in 10 ml of acetonitrile, then to add the solution of the above-mentioned solution in A, and stirring to make fully undergo coordination reaction, finally the resulting orange-yellow reaction the fluid turns on lathe steams remove all solvent, vacuum drying, the obtained product is orange yellow crystal, yield 94% (to cu meter).

6372-42-5 Cyclohexyldiphenylphosphine 80756, achiral-phosphine-ligands compound, is more and more widely used in various fields.

Reference£º
Patent; China University of Metrology; Chai, Wenxiang; Zhu, Qiumeng; Song, Li; Chen, Gang; Guo, Bing; Chen, Zhi; Qin, Laishun; (9 pag.)CN105777785; (2016); A;,
Phosphine ligand
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

6372-42-5, Cyclohexyldiphenylphosphine is a chiral-phosphine-ligands compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,6372-42-5

General procedure: In a sealed tube containing a solution of the phosphine oxide derivative (5 mmol) in anhydrous toluene (1 M) was added InBr3 (1 mol %, 0.05 mmol) and the TMDS (1.5 equiv, 7.5 mmol) under an argon atmosphere. The reaction mixture was stirred at 100 C during 7-40 h depending on the substrate (the reaction was monitored by 31P NMR). After complete consumption of the reagent the mixture was kept under argon in the sealed tube and cooled to 0 C. A solution of BH3.SMe2 (2 M in THF, 1 equiv) was then slowly added. After 1 h at room temperature, 31P NMR analysis of an aliquot indicates complete conversion to phosphine borane adduct. The crude was poured in an erlenmeyer flask and silica gel was carefully added while stirring. When silica gel was added in the reaction mixture, a slightly exothermic reaction was observed. The reaction mixture was then filtered on silica gel and washed several times with ethyl acetate. After evaporation of the ethyl acetate, the residue was purified by flash chromatography on silica gel with pure cyclohexane to afford the desired phosphine-borane.

6372-42-5 Cyclohexyldiphenylphosphine 80756, achiral-phosphine-ligands compound, is more and more widely used in various fields.

Reference£º
Article; Pehlivan, Leyla; Metay, Estelle; Delbrayelle, Dominique; Mignani, Gerard; Lemaire, Marc; Tetrahedron; vol. 68; 15; (2012); p. 3151 – 3155;,
Phosphine ligand
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7650-91-1,Benzyldiphenylphosphine,as a common compound, the synthetic route is as follows.

7650-91-1, General procedure: The following procedure was used in place of the general procedure for this reaction: SiO2 (0.0561 g) and di-(mu-acetato)bis-{2-[(N,N-dimethylamino)methyl]phenyl-C,N}dipalladium(II) 1a (0.0222 g, 0.0370 mmol) were mixed first in a small round-bottomed flask. A stir bar was inserted and the flask, septum, and stirring spatula were all transferred to a glove box with an atmosphere of N2. Benzyldiphenylphosphine 7 (0.020 g, 0.072 mmol) was then added to the flask and thoroughly mixed with the spatula. The reaction was allowed to stir at room temperature in the glove box. The flask was capped with the septum before being removed from the glove box and put in a preheated oil bath (100 C) for 2 h. No CaCl2-filled syringe was used in this reaction. The reaction mixture was filtered into a flask with LiCl as described in the general procedure and purified using preparative TLC in CH2Cl2.

As the paragraph descriping shows that 7650-91-1 is playing an increasingly important role.

Reference£º
Article; Lamb, Jessica R.; Stepanova, Valeria A.; Smoliakova, Irina P.; Polyhedron; vol. 53; (2013); p. 202 – 207;,
Phosphine ligand
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

50777-76-9, 2-(Diphenylphosphino)benzaldehyde is a chiral-phosphine-ligands compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

50777-76-9, A mixture of 0.14 g (0.48 mmol) 2-(diphenylphosphino)benzaldehyde and 0.05 g (0.48 mmol) ethyl carbazate was dissolved, by heating, in 25 mL ethanol. pH of the mixture was adjusted to ?4 with a hydrochloric acid. The mixture was heated at 56 ¡ãC for 60 min. The reaction solution was left to stand at room temperature while the colourless crystals separated from the solution. Yield 0.15 g (83percent). Mp 164-166 ¡ãC. IR (vs-very strong, s-strong, m-medium, w-weak): 3253 (w), 3189 (w), 3049 (m), 2974 (w), 1729 (m), 1707 (s), 1550 (s), 1458 (w), 1435 (w), 1385 (w), 1247 (vs), 1178 (w), 1092 (w), 1055 (m), 763 (w), 744 (w), 696 (m), 657 (w), 499 (w). HRMS (ESI) of C22H21N2O2P found for (M+H+) 377.1384, calcd (m/z) for (M+H+) 377.1414.

As the paragraph descriping shows that 50777-76-9 is playing an increasingly important role.

Reference£º
Article; Milenkovic?, Milica; Bacchi, Alessia; Cantoni, Giulia; Radulovic?, Sinis?a; Gligorijevic?, Nevenka; Arandelovic?, Sandra; Sladic?, Dus?an; Vujc?ic?, Miroslava; Mitic?, Dragana; Andelkovic?, Katarina; Inorganica Chimica Acta; vol. 395; (2013); p. 33 – 43;,
Phosphine ligand
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.13689-19-5,Tricyclohexylphosphine oxide,as a common compound, the synthetic route is as follows.

General procedure: The same general procedure was adopted for the synthesis of all the complexes. The lanthanide bromide and tricyclohexylphosphineoxide were dissolved in hot ethanol. Heating was continued for 1 h during which time, in some cases, small quantities of crystalline material formed. Either cooling to room temperature followed by standing for 16 h or on prolonged standing and slow evaporation of the solution afforded crystalline materials. The crystals were filtered, washed with ethanol and dried at the pump. Representative syntheses and characterisations are described below.

13689-19-5, 13689-19-5 Tricyclohexylphosphine oxide 26187, achiral-phosphine-ligands compound, is more and more widely used in various fields.

Reference£º
Article; Bowden, Allen; Lees, Anthony M.J.; Platt, Andrew W.G.; Polyhedron; vol. 91; (2015); p. 110 – 119;,
Phosphine ligand
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.50777-76-9,2-(Diphenylphosphino)benzaldehyde,as a common compound, the synthetic route is as follows.

50777-76-9, General procedure: To a dichloromethane solution (15 mL) of 2-diphenylphosphinobenzaldehyde (ca. 3 mmol) was added an equimolar amount of the appropriate substituted amine. An excess of magnesium sulphate was also added to the reaction mixture to remove the water by-product. The reaction was left to stir at room temperature for 16 h, after which time the magnesium sulphate was filtered off and the solvent removed from the filtrate in vacuo to give a yellowe orange oil. The oily crude products of ligands 1a-1f were solidified by dissolving the oil in hot hexane, followed by quick hot filtration of the liquid product. The resultant solution was then cooled at -16 ¡ãC overnight to give an off-white powder, which was filtered and dried in vacuo.

As the paragraph descriping shows that 50777-76-9 is playing an increasingly important role.

Reference£º
Article; Mogorosi, Mokgolela M.; Mahamo, Tebello; Moss, John R.; Mapolie, Selwyn F.; Slootweg, J. Chris; Lammertsma, Koop; Smith, Gregory S.; Journal of Organometallic Chemistry; vol. 696; 23; (2011); p. 3585 – 3592;,
Phosphine ligand
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.50777-76-9,2-(Diphenylphosphino)benzaldehyde,as a common compound, the synthetic route is as follows.

General procedure: The iminophosphine ligands were prepared according to the method reported by Shirakawa and co-workers [70]. To 2-(diphenylphosphino)enzaldehyde(1) (200 mg, 0.689 mmol) 0.758 mmol (1.1 M equivalent) of the corresponding amine and 10 mL of freshly distilled toluene were added. The mixture was stirred under reflux (150?160 ¡ãC oil bath temperature) for 6 h.The solvent was removed in vacuo and the crude product was purified by bulb-to-bulb vacuum distillation (170 ¡ãC at 0.05 mm Hg,consistently used for all products) using a Kugel Rohr apparatus into which argon was continuously piped to prevent the ingress of oxygen. Since the iminophosphine products were unstable onsilica, no Rf-values are included for the iminophosphine ligands., 50777-76-9

The synthetic route of 50777-76-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Traut-Johnstone, Telisha; Kanyanda, Stonard; Kriel, Frederik H.; Viljoen, Tanya; Kotze, P.D. Riekert; Van Zyl, Werner E.; Coates, Judy; Rees, D. Jasper G.; Meyer, Mervin; Hewer, Raymond; Williams, D. Bradley G.; Journal of Inorganic Biochemistry; vol. 145; (2015); p. 108 – 120;,
Phosphine ligand
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

24171-89-9, Tri(thiophen-2-yl)phosphine is a chiral-phosphine-ligands compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: 1a (70.5 mg, 0.20 mmol), 4-phenylthioxanthone (3 mg, 0.01 mmol), CH3OH (30 mL) were added to a pyrex reaction flash which was equipped with a magnetic stirrer. The mixture was irradiated by a 23 W household lamp at rt under air atmosphere. The photoreaction was completed after 40 minutes as monitored by TLC (eluent: petroleum ether). The solvent was removed and the residue was purified by flash column chromatography on silica gel (eluent: petroleum ether/ethyl acetate = 10/1?EA) to afford 2a as a solid (74 mg, 100%); 1H NMR (400 MHz, CDCl3) delta 7.56 (dd, J = 11.6, 8.8 Hz, 6 H), 6.95 (dd, J = 8.8, 2.0 Hz, 6 H), 3.83 (s, 9 H)., 24171-89-9

As the paragraph descriping shows that 24171-89-9 is playing an increasingly important role.

Reference£º
Article; Ding, Aishun; Li, Shijie; Chen, Yang; Jin, Ruiwen; Ye, Cong; Hu, Jianhua; Guo, Hao; Tetrahedron Letters; vol. 59; 43; (2018); p. 3880 – 3883;,
Phosphine ligand
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate

50777-76-9, 2-(Diphenylphosphino)benzaldehyde is a chiral-phosphine-ligands compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: All syntheses were carried out in the same fashion. Each reaction was monitored by TLC for 24 h to determine when the starting materials had been consumed. All TLC analyses were run on Selecto Scientific flexible silica gel-coated plates containing a fluorescent indicator and were developed using a hexanes-ethyl acetate (4:1) solution as the eluent. The following procedure is representative of the synthesis of all chalcones (see [Chart 1] and [Chart 2] for structures): A 25-mL round-bottomed flask was charged with the appropriate derivatives of both acetophenone (3 mmol) and benzaldehyde (3 mmol), and mixed with 10 mL of 95percent EtOH. The mixture was then stirred magnetically while being gently heated (in a 30 ¡ãC water bath) until both starting materials dissolved. In a separate flask, NaOH (3.5 mmol) was added to 10-mL of an ethanol-water (1:1) and the mixture was stirred magnetically until the solid dissolved. The NaOH solution was then added dropwise (using a Pasteur pipet) to the ethanolic solution of acetophenone and benzaldehyde described above. In most cases, the reaction mixture turned yellow and solidified within a few minutes. Ice water (2 mL) was added to the flask and the mixture was stirred vigorously. The solid was collected on a Hirsch funnel, washed with cold water, and air-dried overnight. The purity of the crude product was determined at this point using a combination of TLC analysis, melting point measurement, and 1H NMR spectroscopy. In case of an oily product, the reaction mixture was extracted with two 10-mL portions of CH2Cl2 and the organic phase was collected, dried over Na2SO4, and removed using a rotary evaporator. The purity of the oily product was then determined as described above. All impure products (solid or oil) were purified by column chromatography using Merck Silica gel (grade 60, 230-400 mesh) and 4:1 hexanes-ethyl acetate as eluent. In case of a solid, chromatographic separation was followed by recrystallization from either methanol or ethanol-water mixture. In all cases, the purity of the final product was checked again as described above; the spectral characteristics were found to be in good general agreement with those found in the literature.4 The organic chalcones prepared for this study were either pale-yellow solids or oils of the same color (as specified); the ferrocenyl analogs were reddish-orange solids or oils. For each of the reported compounds below, the 1H NMR data is presented as delta (multiplicity, integral ratio), and the IR data as nuCO, nuCC. The following percent yield and physical data are for new chalcones prepared for this study. Data for other chalcones (not given below) have been reported elsewhere[4], [5] and [6] and are also available online as Supplementary data., 50777-76-9

Big data shows that 50777-76-9 is playing an increasingly important role.

Reference£º
Article; Attar, Saeed; O’Brien, Zachary; Alhaddad, Hasan; Golden, Melissa L.; Caldero?n-Urrea, Alejandro; Bioorganic and Medicinal Chemistry; vol. 19; 6; (2011); p. 2055 – 2073;,
Phosphine ligand
Chiral phosphine ligands in asymmetric synthesis. Molecular structure and absolute configuration of (1,5-cyclooctadiene)-(2S,3S)-2,3-bis(diphenylphosphino)butanerhodium(I) perchlorate tetrahydrofuran solvate